waterRIDE™ History

Click on the products below to view the version history for that product:

waterRIDE FLOOD Manager

waterRIDE 1D Surface

visionMAKER

waterRIDE SEWER Module 1: GIS analyser

waterRIDE SEWER Module 2: model builder

RMAnet

RMAviewer

waterRIDE FLOOD Manager

v6.09

        New Features:
 - Exporting to GIS - Added simplify routine
 - Added Key Points for dislaying active surface value for a view/view export
 - Added CSV support for exporting X,Y,Value files
 - Added support for TFW image registration files
 - Added active text position control for GIS layers
 - Added ability to select which series are displayed on multi-variable charts

Updated Features:
 - Exporting to GIS - Enhanced smoothing routine - uses constrained cubic splines
 - enhanced layout of export WL Contours and Flood Extents form
 - added ability to nullify surface both inside and outside multiple polygons

Bug Fixes:
 - access violation when converting SOBEK 2D file
 - Fixed a Unicode problem with the MapInfo Drid Import DLL.
 - Fixed default filename for saving Flood Planning Level Surface
 - Changed labelling of "DTM Files" to "waterRIDE Surface Files"
 - Fixed bug in copying and pasting branches
 - Fixed "basic" display of wrr files when reprojecting
 - Fixed exporting edges for wrr files
 - Fixed a bug VMFPM script that was putting -9999 values for "Depth over level in field".
 - Fixed a bug where mouse actions like zooming and panning where no layer was active in the view.
 - Fixed deleting selected layers in a view from the project
 - Fixed updating layers in the current project after processing

** Significant changes have also been made to the utility waterRIDE BATCH. **

v6.00 
 New Features:
 - exporting of flow vectors to GIS added to tools menu
 - start date & time added to TIN & Grid metafile to facilitate dateTime display instead of hours
 - multiple data point selection available for water surfaces (hold CTRL while selecting points)
 - GIS toolbar tool added to calculate distance along a polyline to a user clicked point (usefull for determining chainages along a centreline)
 - batch exporting water level contours at a specfied interval

 Updated Features:
 - exporting contours, surfaces and flood extents rationalised between TINs and Grids and speeded up for Grids. Extents mapping can now be lines or regions.
 - auto exporting of water level contours added to the flood extents tab
 - saving of Grid queries added
 - printing of map view altered to print the view's bitmap at 200dpi, rotated to fit the page
 - translucency bar shows percentage
 - view contents list items now coloured similar to the add layers dialog for improved recognition
 - search dialog for GIS layers improved
 - basic flood certificate creation & use improved
 - the Links Window graphs (profile, time series, etc) now includes buttons for zooming, panning, etc
 - profile and flux plots can be exported in AVI files
 - two options available for difference surfaces where one surface is wet and the other is dry
 - improved methods for rotating Grid water surfaces
 - a number of small improvements made for efficiency & use
 - functionality of composite water surface layers improved for a number of actions
 - included axes on time series chart in AVI files
 - included icons for zooming, panning, exporting, and calculating area for charts in the links windows

 Bug Fixes:
 - comparison profile for terrain was only showing one profile
 - GIS vector text layers could not process long text
 - exported contours were extending beyond wet extents
 - synchronisation of charts in AVI files

v5.05

        - New Feature - introduced Flood Hazards Management console. Greatly improves the flexibility of using various flood hazards.

        - Update Existing Feature - 'Peak of Peaks' enhanced to store the name of the water surface file containing peak water level at all locations in surface

        - Minor Bug Fix - fixed display of discrete category data in wrb files

v5.0

        - New Feature - Added support for direct import of HEC GeoRAS model results (previously in waterRIDE 1D surface)

        - New Feature - Added support for rotated grid model results.
- New Feature - Can now display the actual date & time for each model time-step.
- New Feature - More powerful tools for automated stretching of flood surfaces to the flood extents.
- New Feature - Can now import model results from ANUGA hydrodynamic model.
- New Feature - Create a single seamless DEM from multiple source files using waterRIDE Batch.
- New Feature - Added thematic display of the energy surface.

        - Update Existing Feature - expanded confetti tracer to wrr files
- Update Existing Feature - Enhanced support for the network license server option. A network license server provides floating licenses to users anywhere on the network without the transfer of the physical dongles.

        - Minor Bug Fixes

v4.50

        - New Feature - Mannings equation hydraulic calculator (Tools Menu)
- New Feature - Confetti tracer function (Animation toolbar)
- New Feature - Additional easier access to time series & profile plot tools (Flood toolbar)
- New Feature - Importing of MicroStation 3D triangles & DXF 3D Faces to wR TINs added
- New Feature - Utilities menu added to replace wR_Translator - includes model conversion, peaks manipulation, clipping, stretching, grid conversions, dtm updates, dtm exporting & importing
- New Feature - refinements to contour and surface exporting
- New Feature - conversion of GIS field values to GIS vector text (useful for contour labels)
- New Feature - removed need for /nologo in shortcut - fullscreen or presentation mode can now be toggled on & off
- New Feature - active view name added to application title bar
- New Feature - logarithmic and custom legend scales added to thematic mapping
- New Feature - DtmBatch merged into wR_Batch and now includes batch processing of flood surface manipulation.
- New Feature - Numerous small improvements to make the interface and dialogs more intuitive and easy to use.

v4.31
- There are no longer separate standalone and network versions.

 

v4.27
- Update Existing Feature - [MIKE21 conversion] added support for converting MIKE21 DT2 files of over 2GB in size.
- Update Existing Feature - [MIKE21 conversion] The user can now specify the land value.

 

v4.20
- Update Existing Feature - [Utilities] Can now update the terrain of a DTM file using multiple source files.
- Update Existing Feature - Can now use mapping on-the-fly (*.wrm) files in DTM composite files (*.wrc).
- Update Existig Feature - Exporting X-Y-V tool now saves the file as *.txt file instead of *.dat files.

        - Minor Bug Fixes

 

v4.11
- Update Existing Feature - [House Photos] Added the images back to the photo registration navigation buttons.
- Minor Bug Fix - [House Photos] Now accept float as the field type for the floor and eaves pixel
fields. The values will be rounded to the nearest integer.

 

v4.10
- Update Existing Feature - when exporting flood extent for a single layer, the user is prompted to select

        the output file location and the projection of the layer if projection is not set in the layer.
- Update Existing Feature - The search dialog now remembers the last field used for searching.
- Minor bug Fix - Now shows the locations of the points and cross-sections for flux plots
- Update Existing Feature - FPM dialog will not be shown if the necessary layers for a tool are not available in the project.
- New Feature - Integrated some model conversion tools from Translator.

 

v4.02

        - Updte Existing Feature - widespread speed improvements

        - Minor Bug Fixes

 

v4.01
- Update Existing Feature - Added an optional eaves level field which can be used in place
of the 2.4 metres floor-to-eaves height for house photos
- Minor Bug Fixes

v4.0

        - Major release incorporating significant interface and usability enhancements, and release of 'Flood Plain Manager' sophisticated toolset.

      - New Feature - Added GIS drawing/editing tools

      - New Feature - When exporting view, can choose whether to draw the legend or not. For custom bitmaps, both the draw legend

          and draw scale check boxes are available.
- Update Existing Feature - Under the tile plot border graphics tab, can now move objects and edit text.
- Minor Bug Fix - The current time-step is now displayed correctly to the second without the 00:00:59 problem when the time is

        exactly in one-minute increments.
- New Feature - The current time or the peaks text is now shown permanently on the screen, including exported views.
- Update Existing Feature - For the flood forecast setup, the automatically created interpolated layer can now be a *.wrr file as well.

       - Update Existing Feature - When running the flood parameter query, an empty form is no longer shown if the active DTM

        surface does not contain time-varying results.
- Update Existing Feature - Zoom window can now be dragged in any directions.
- Update Existing Feature - Improved the speed of exporting Raster grid.
- Update Existing Feature - The time-series and flux plot tools are no longer shown unless the active layer has time-varying data.
- Update Existing Feature - When running forecast setup, any existing settings saved in the *.VMINI file will be loaded.
- Update Existing Feature - Reduced the time it takes to read the gauge levels in forecast application
- Minor Bug Fix - Parameter query results are now retained after repainting.

      - Update Existing Feature - Added the option of using the flood levels of an existing flood surface as well as interpolation from gauges.
- Update Existing Feature - Can now specifies the start-time, end-time and time-step of animation recording. Recording now starts

        and stops automatically.

v3.44
- Minor Bug Fix - Fixed the Ctrl-A shortcut for bringing up the layer display dialog box for layers that do no store the true file name

        in datasource (eg. .wrm and composite files).
- Update Existing Feature - View comparer tools are now located under the tools menu and not on the toolbar.
- New Feature - Added a time-to-level option to GIS flood integration.
- New Feature - Added ability to load mif/mid point files for time-series plot and profile plots.

      - New Feature - Holding down the shift key while moving the mouse in a time-series chart now snap the cursor to the data points.

 

v3.43
- New Feature - added info tool to display all hydraulic parameters at a point
- Update Existing Feature - GIS flood integration will no longer use the peak results by default. It will use the time-step that is

currently active.
- Update Existing Feature - Significant speed improvement for GIS flood integration.
- New Feature - Added a quick-run button for GIS flood integration.

v3.42
- Minor Bug Fix - Fixed profile plot

v3.41
- Bug Fix - resolved singles/doubles file format issue

 

v3.40
- Update Existing Feature - Flood planning levels only drawn when 'wet' (i.e. flood planning level higher than ground).
- New Feature - Added .WRM file format. Supporting mapping-on-the-fly with base raster .WRR file and .WRB or .WRR data results file.
- New Feature - Added a view comparer feature where images of multiple views can be captured and then compared by 'flicking'

through them.
- MInor Bug Fix - Can read files of over 2GB in size correctly.
- New Feature - Added support for comparative flood damages analysis (i.e. not NPV analysis). Flood damages can be

calculated for any number of flood surfaces at the same time.
- Uodate Existing Feature - save/load flood damages settings.
- Uodate Existing Feature - Added mouse-wheel zoom factor adjustment and other zoom/pan improvements.
- New Feature - Added the zoom-lock button to the presentation version toolbar.
- Update Existing Feature - Flood damages save the flood depth to GIS files to 3 decimal places instead of one decimal place.

v3.32
- Update Existing Feature - Terrain can be displayed when time-varying data is selected instead of limiting to peaks data only.
- Streamlined memory management routines to enhance display speed
- New Feature - Flood forecast support for WRB and WRR files incorporated.
- New Feature - Support for exporting flood planning surface for both WRB & WRR layers.

v3.31
- Minor Bug Fixes
- Enhance Existing Feature - Streamlined the read and write disk access of grid layers.

v3.30
- New Feature - Support the first public release of the waterRIDE Grid (*.wrr) file format.

v3.26

        - New Feature - Added ability to export animations as AVI files

        - Bug Fix - minor bug fixes

v3.201

        - New Feature - Initial release of DTMbatch (v2.95)

v3.20

        - New Feature - Added tutorial

 

v3.11

        - New Feature - Added tutorial

        - New Feature - Added support for MrSid imagery

        - Update Existing Feature - Updated Help system

        - Update Existing Feature - Enhanced control over velocity vectors

        - Bug Fix - Fixed bug in index system

 

v3.0

        - New Feature - Added support for JPEG2000 imagery

        - New Feature - lock zoom added - <Ctrl Alt Z> to lock zoom between views

        - New Feature - save links table to csv - overwrite prompt added

        - New Feature - fluxplot added

        - New Feature - added paste branch from TOC

        - New Feature - added ability to load hazard files in File menu

        - New Feature - added contour export choices including joining and smoothing

        - New Feature - added Ctrl Alt NWUDR for autocontour scaling

        - New Feature - added support for saving profile plot point locations

        - New Feature - added ability to quickly move layers

        - New Feature - added ability to do tile plots

        - New Feature - added ability to plot node labels

        - New Feature - various new minor features incporporated into interface

        - Update Existing Feature - Numerous interface improvements

        - Update Existing Feature - Enhanced speed of general display

        - Update Existing Feature - Enhanced speed of raster layer display

        - Update Existing Feature - right click return to prevmode or popup menu rationalised

        - Update Existing Feature - zoom/pan and timesteps maintain current TOC panel

        - Update Existing Feature - expanded Export FloodInfo to write out multiple wrbs to an active gis layer

        - Minor Bug Fix - resetting of timeseries button fixed

        - Minor Bug Fix - fixed bug with initial extents & added <Fit all layers>

        - Minor Bug Fix - fixed bug with combined polygon terraces

        - Bug Fixes - Numerous minor bug fixes

 

v2.36

        - New Feature - Enhanced legend and palette editor

 

v2.15

        - New Feature - Added support for translucent thematic filling

        - Update Existing Feature - Enhanced suppport for cross sectional profiles

v2.13

        - New Feature - Built-in colour palette

        - New Feature - Volume calculation menu item

        - New Feature - Menu item to view links window

        - Minor Bug Fix - Cross section sensitive to end points

v2.12

        - Update Existing Feature - Improved and expanded help system

        - Update Existing Feature - Increased speed of ECW display

v2.11

        - Update Existing Feature - Added MGA to projections

v2.10

        - New Feature - Point and click image registration

        - New Feature - Legend added to project tab

v2.05

        - New Feature - Option to display highlighted active text next to cursor

        - New Feature - Separate basic symbology for each view

        - New Feature - Layer zoom display limits

waterRIDE 1D Surface

v3.11
Bug fixes:
- Fixed a bug where the Exit item under the File menu did not do anything.
- [WR1D]  Fixed a bug where the original cross-sections are not connected correctly
  if extra cross-sections were inserted and then the network was reset.
- [WR1D]  Fixed a bug in the conversion of WR1D file where the left-bank point <1> index
  was lost if it was part of a starting descending run that was discarded.
- [Structured GIS]  Now use CHAR(1) as the default field type.

v3.10  
- [SOBEK]  Fixed some bugs in creating WR1D file from SOBEK 1D and creating the surface
  related to unicode in Delphi 2009.
- [MIKE11]  Fixed a problem with the high X values of cross-sectiona points was causing
  precision error that resulted in incorrect matching of duplicated run of X-Z points.
- [MIKE11]  Fixed a problem with incorrectly counting the length of duplicated run
  of X-Z points in cross-sections.
- [MIKE11]  Fixed a problem that may occur with closed cross-sections.  It now ignores
  cross-sections with closed channels.
- [MIKE11]  Now when running res11read.exe, it automatically writes the text file to
  the temporary folder first before copying the file to the proper location to avoid
  slow speed when the file is on the network.
- [MIKE11]  Can now process very large RES11 text files without running out of memory.
- [WR1D]  When selecting cross-section points, it will now only allow the relevant
  point to be selected, e.g. left and right points when stretching a cross-section
  and the centre point when deleting cross-sections.
- [WR1D]  Added tools for adding/deleting extra cross-sections between two original
  cross-sections.
- [XP-Storm]  Added a tool for converting XP-Storm output spreadsheet to structured
  GIS format.
- [Structured GIS]  Added a tool for preparing the indices of structured GIS file
  using the centreline.
- [Indexed Contours]  The create TIN surface from indexed contours tool has been moved
  to the new menu "GIS X-Sects".
- [MIKE11]  Now supports variable Manning's n for the cross-sections.
- [MIKE11]  After calculating the velocity along each point of a cross-section, it now
  normalises the values so that the calculated total flow matches the original flow
  value.
- [MIKE11]  Now no longer tries to create the *.wr1d file if the conversion from binary
  RES11 file to ASCII format fails.
- [MIKE11]  Fixed a bug that caused the time-varying data not read in correctly if the
  lines with unit names in the RES11 ASCII file are blank.

v3.05a  
- Added a tool for creating TIN from indexed contour lines.
- Added VICGRID94 to the supported projections.

v3.01 
- [HECRAS-SDF]  Fixed bug with "*" in river stations of interpolated x-sects in the
  results file.

v3.00 
- Added support for network license server.
- [wRLibNew] added to project

v2.74 
- [DRAINS]  The data/results import tool is now more robust and can no longer assume
  column numbers.
- [DRAINS]  Now support basins in the network as well.

v2.73  
- [MIKE11]  Fixed a bug that caused the program to go into an infinite loop when
  creating a WR1D file from MIKE11 with no X-Y coordinate values, i.e. all (0,0).
- General library updates.

v2.72  
- General library updates.
- New vmscr file.
- Single executable file for both standalone and network dongles (/network).
- [HECRAS]  Made the reading of the cross-section CSV file more robust.
- [HECRAS]  Can now handle simplified results file with only Reach, River Sta,
  Profile, W.S. Elev and Vel Chnl columns.
- [Data Layers Dialog]  Fixed a bug that resulted in no layers being removed
  from the current view if all layers were unchecked.
- [wR Profile]  Added the option to specify the channel velocity factors in
  the cross-section ('ChannPointVels').
- [HECRAS]  When importing HECRAS model using the profile points method, the
  river name is no longer case sensitive and the name may contain spaces.
- Started using the Ini file in the user's application data file.
- [MIKE11]  The program now asks the user to select Res11Read.exe the first time,
  instead of hard-coding the location.
- [MIKE11]  Now supports the MIKE11 2008 version ASCII file format with the possible
  georeferenced data of cross-sections.
- [MIKE11]  Now cleans up any duplicated points or run of duplicate points inv2.60  (
- [Imglayer]  Changed to give the warning message about ECW or MrSID DLL's not
  found only once.
- [Imglayer]  ECW and MrSID DLL files can now be located in a common folder
  instead of the local directory of the application.
- Fixed a bug in the Quick Start dialog where the project would not be
  initialised correctly if the Open Existing project option was selected and
  then the user selected Cancel in the open file dialog.  This resulted in a
  range check error when adding a layer afterwards.
- [WR1D]  The status bar now shows the map information when the move, delete
  or restore tool is selected.
- [WR1D]  No longer assumes that the branch points section of the ASC file is
  sorted when converting ASC to WR1D.
- [WR1D]  Fixed the problem where there was no TIN between two cross-sections
  if there was no type 2 point between them.
- Fixed a potential problem of reading CSV text with an empty string surrounded
  by quote characters (i.e. "").
  the cross-sections.
- [MIKE11]  Now attempts to fix any points not in descending order and discards
  them if not possible.  Final cross-section points would be in ascending order.
- [MIKE11]  Now the user no longer deals with the MIKE11 ASCII files explicitly.
  *.wr1d is created directly from *.res11 and the *.res11 files are processed
  directly into WRB files.  The MIKE11 ASCII files (*.res11_txt) are created
  automatically as needed.
- [SOBEK]  Sobek version information is now saved in the user's application data
  INI file.
- [MIKE11]  Fixed a bug in the creation of WRB that causes the water level of the
  left point of the first cross-section to be overwritten by water levels of
  cross-sections of deleted branches.
- [HECRAS]  Fixed a bug where if there is a '*' in the station value of a cross-section
  of a SDF file, the cross-section would not be read correctly.
- [WR1D]  Need to hold down the Alt key to cycle through points that are close
  to each other.

v2.60  
- [Imglayer]  Changed to give the warning message about ECW or MrSID DLL's not
  found only once.
- [Imglayer]  ECW and MrSID DLL files can now be located in a common folder
  instead of the local directory of the application.
- Fixed a bug in the Quick Start dialog where the project would not be
  initialised correctly if the Open Existing project option was selected and
  then the user selected Cancel in the open file dialog.  This resulted in a
  range check error when adding a layer afterwards.
- [WR1D]  The status bar now shows the map information when the move, delete
  or restore tool is selected.
- [WR1D]  No longer assumes that the branch points section of the ASC file is
  sorted when converting ASC to WR1D.
- [WR1D]  Fixed the problem where there was no TIN between two cross-sections
  if there was no type 2 point between them.
- Fixed a potential problem of reading CSV text with an empty string surrounded
  by quote characters (i.e. "").

v2.52  
- waterRIDE library update.
- [WR1D]  Fixed a bug an access violation error that occurred during the adding
  of extra TIN triangles if the network contains extra TIN triangles belonging
  to deleted cross-sections.
- [HECRAS]  When importing HECRAS model using the profile points method, it
  now no longer expects the river name if there is only a single river.

v2.51 
- [HECRAS]  Now supports the importing of HEC-RAS ASCII GIS export (*.sdf)
  files.
- Fixed a bug where the zoom window was stuck on the top-left corner if a wR1D
  layer was active.
- [WR1D]  The add triangle tool now uses the highlighted node rather than try
  to find a new node using the coordinates.
- [WR1D]  The delete triangle tool now deletes the highlighted triangle instead
  of trying to find a triangle at the mouse cursor.
- Toolbars that are currently not available are made not visible instead of
  disabled.
- Fixed the problem where if multiple points are on top of each other, only
  one could be selected.
- [WR1D]  Added tool buttons for deleting and restoring objects.
- [WR1D]  Removed the enter and delete keys for deleting and restoring objects.
- [WR1D]  When exporting network to GIS, if the projection of layer is not set,
  a dialog box will prompt the user to select the projection to use.  This avoid
  the non-earth projection problem when the GIS files are imported in MapInfo.
- [WR1D]  Now write out the real extent for the exported GIS network.
- [WR1D]  Sped up the reading of the MIKE11 time-step by not processing
  unnecessary data.
- [WR1D]  Now only draws the outline of the cross-section TIN instead of all
  the triangles to save the re-TINning and redrawing time.  It was a problem
  for large networks which were taking several seconds each time to re-TIN
  and to redraw.
- [HECRAS]  Fixed the problem where the '*' in the river station values of some
  result files was crashing the conversion process.

v2.50 
- [WR1D]  Processing MIKE11 result files now supports choosing time-step
  size to save the results.
- [DTM]  Added support for DTM files that contain terrain only.
- Can no longer add the same file twice in the data layers dialog.
- Reorganised and rationalised the menu items for converting 1D models [dmc].
- Now need to select a tool before dragging and moving points in a wR1D network.

v2.21  
- New cursor for the info mode.
- [wR1D]  When converting MIKE11 binary file to ASCII, or MIKE11 ASCII to wr1d
  files.  The original file name is given as the default output file name.
- [wR1D]  Added batch MIKE11 binary to ASCII file conversion.
- [wR1D]  Fixed bug for factor coords where the new coordinates were not
  written to the wr1d file.
- [wR1D]  Fixed the bug where when the extent of a cross-section is resetted in
  memory, the first and the last cross-section points were used instead of the
  left and right extent points.
- [wR1D]  Fixed bug when processing MIKE11 files, the output WRB files were
  written in the same directory as the input ASCII file instead of the specified
  output directory.
- [wR1D]  When processing a single MIKE11 results file, the file name of the
  input MIKE11 ASCII file is suggested as the file name of the output WRB file.
- [wR1D]  Now the wR1D layer takes into account the left and right cross-section
  points as well as the branch points when determining the layer extent.
- Added the mouse wheel adjusting zoom factor feature.  Zoom factor is displayed
  on the status bar.
- [wR1D]  Fixed the problem with the extra TIN triangles not removed correctly
  when the branch of a TIN triangle point is inactive.
- Coordinates are now displayed even where the project is not saved.
- Coordinates are displayed for mouse position when zooming and panning tools
  are active.
- [HECRAS]  The processed HECRAS surface now contains only water level and
  velocity data.  No more dummy ground level and DELVAL VxD and hazard values.
- [GIS]  More efficient GIS shape search.
- [RST]  Enabled support of RST layers in wR-1D.
- [Generic 1D]  Added support for time-varying generic 1D models [camd].
- [Generic 1D]  Added a tool for converting coordinate projections [camd].
- [Generic 1D]  Added a tool for copying the TIN extents of generic 1D models
  (for time-varying files) [camd].
- [DRAINS]  Fixed a bug where commas in the text of the DRAINS export files
  were causing parsing errors.

v2.20

        - New Feature (wR-1D) - Added support for batch processing of MIKE11 and SOBEK results files.

        - New Feature (wR-1D) - Added support for processing files produced by earlier versions of SOBEK.

        - Update Existing Feature (wR-1D) - Changed the order of some dialogs to a more logical order.

        - Update Existing Feature - A few general improvements to the user interface.

        - Update Existing Feature - Some miscellaneous improvements to the display.

        - Bug Fix (wR-1D) - Fixed several problems associated with using projections for a wR-1D layer.

        - Bug Fix (wR-1D) - Fixed a problem where MIKE11 ASCII result files may not be read correctly if a branch name exceeds 15 characters.

        - Bug Fix (wR-1D) - Fixed several problems with the processing of SOBEK 2D result files.

        - Bug Fix (wR-1D) - Fixed a problem where some cross-section points may not be selectable with the mouse if they are too close to each other.

        - Bug Fix (wR-1D) - Fixed a memory efficiency problem that causes the application to slow down gradually when editing a network.

        - Bug Fix - Fixed a problem in the calculation of custom hazard categories.

        - Bug Fix (HEC-RAS) - Fixed the direction of HEC-RAS model velocity vectors.

        - Minor Bug Fix (wR-1D) - Fixed various flow-logic problems in a few dialogs.

v2.11

        - New Feature (wR-1D) - Added support for the addition and removal of extra TIN triangles.

        - New Feature (wR-1D) - Added support for converting waterRIDE MIKE11 *.can files to waterRIDE 1D Surface *.wrcan files.

        - New Feature (wR-1D) - Added the MIKE11 binary to ASCII file conversion tool to the menu.

        - New Feature (wR-1D) - Ctrl-A now selects all lines in the *.wrcan editor.

        - Bug Fix (wR-1D) - Fixed a bug where the angle of a cross-section may be calculated incorrectly for a network.

        - Minor Bug Fix (wR-1D) - Fixed several minor display errors.

v2.10

        - New Feature (wR-1D) - Added support for MIKE11 models, superceding waterRIDE MIKE11.

        - New Feature (wR-1D) - Pressing 'R' when a wR-1D layer is active is a shortcut for setting the layer to use the random palette.

        - Update Existing Feature (wR-1D) - Changed the file format of the *.wr1d file. Existing *.wr1d files will have to be recreated. This has no effect on existing *.wrcan files.

v2.01

        - New Feature - Added the export view function.

        - New Feature (wR-1D) - Added the export wR-1D network to GIS function.

        - New Feature (wR-1D) - Added the support for the best-effort recreation of an existing *.wrcan file of a different wR-1D network.

        - New Feature (wR-1D) - Holding down the Ctrl key now locks the length of a cross-section when it is being dragged.

        - Update Existing Feature (wR-1D)- Deleted cross-sections of a branch will now be TIN'ed across between the upstream and downstream cross-sections.

        - Update Existing Feature - Added some hint text to the menu items.

v2.00

        - New Feature - Added support for generic link-node models.

        - New Feature - Added support for SOBEK 1D and 2D models.

        - Bug Fix - Fixed the image registration feature.

 

 

visionMAKER

v2.17

        - New Feature - Point and click image registration

        - New Feature - Legend added to project tab

v2.12

        - Update Existing Feature - Increased speed of ECW display

waterRIDE SEWER Module 1: GIS analyser

v1.04

        - New Feature - Profile plot added

        - New Feature - Time plot added

        - Updated Existing Feature - Live link between time plot and planview

v1.0

        - Product Released

waterRIDE SEWER Module 2: model builder

v1.53

        - New Feature - added support for translucent thematic filling

v1.5

        - MAJOR VERSION UPGRADE - added support for various input file formats

v1.0

        - Product Released

RMAnet

 

v 3.07
Bug Fix - Fixed bug in initial display of Raster DEM's (Idrisi)

v 3.06
Update Existing Feature - Added additional keyboard shortcuts
Bug Fix - Fixed display of MrSID imagery

v 3.05
Minor Bug Fix - Fixed importing of network portions with new material types

v 3.04
New Feature - Added ability to click element nodes using the spacebar

v 3.03
Update Existing Feature - SQL select can now operate on nodes/elements contained within a fence - the fence must exist before selecting the SQL select
Bug Fix - Fixed cleaning of 1D-2D Join elements
Bug Fix - Fixed progress bar for conversion of *.adf grids
Bug Fix - Fixed display update when using maps "on top" of network

v3.02

        New Feature - Added ability to create element blocks with a specific element side dimension (eg 5.0m)
New Feature - Added support for element block 'streams'
New Feature - Added ability to locate network errors after checking by double clicking on the error line
Update Existing Feature - Improved help system and manual
Update Existing Feature - Updated support for managing material type information, including setting colours
Update Existing Feature - Enabled user defined number of recent files in list
Bug Fix - Fixed network checking for overlapping elements

 

v3.01
New Feature - Added support for ESRI Grids (*.adf)
New Feature - Added support for MapInfo Vertical Mapper Grids (*.grd)
New Feature - Added support for ERDAS Imagine Grids (*.img)
Minor Bug Fix - Fixed element type colour ranges
Bug Fix - Fixed elevation contour display of 1D2D Lateral elements

 

v3.00
New Feature - Added support for MapInfo TAB files
New Feature - Added support for MicroStation DGN files
New Feature - Added support for Google Earth KML files
New Feature - Added support for TIFF/GeoTIFF Image files
New Feature - Added ability to specify map file point colour
Update Existing Feature - Utilises latest waterRIDE engine

 

v2.12

        New Feature - Added ability to change node label colours
Update Existing Feature - Recompiled using latest waterRIDE library
Minor Bug Fix - Fixed saving of 1D cross section files 'ENDDATA' line
Minor Bug Fix - Fixed display of Element material types

 

v2.10
Minor Bug Fix - Fixed converting network to MIF/MID GIS format.

 

 

v2.09
New Feature - Added support for waterRIDE Raster DEM files (*.wrr)
Update Existing Feature - ASCII grids can be loaded directly (implements automatic conversion to binary)
Minor Bug Fix - Fixed initial folder for saving network files (using "save as...")

 

v2.08

        New Feature - Added ability to transition node elevations from a start value to an end value
New Feature - Added ability to import and export network portions
New Feature - Added ability to refine elements/network (ie increase network density)
New Feature - Added ability for managing material types properties

        New Feature - Added support for displaying composite aerial imagery files (RMAviewer)

 

v2.07

New Feature - Added View Attributes shortcut as Ctrl-A for consistency with RMAviewer
Update Existing Feature - Increased network outline line width for high DPI screens
Minor Bug Fix - Fixed indexing of dtm's

        Minor Bug Fix - Enhanced conversion of ASCII Grids

        Library Update - upgrade to waterRIDE library

 

v2.06

New Feature - Added support displaying active field value for all GIS entities
New Feature - Added support for loading recently used support files
Bug Fix - Fixed addition of midside nodes to 1D2D Join elements
Minor Bug Fix - Fixed assigning of 1D properties when inserting midside nodes

 

v2.05

New Feature - Added support for UNIX formatted binary network files
New Feature - Added support for network colour of 1D elements
Update Existing Feature - Increased speed of loading/saving binary and ASCII network files
Update Existing Feature - Added support for displaying points in GIS files
Update Existing Feature - Added support for text in GIS files
Minor Bug Fix - Fixed bug in reading of 1D2DJoin elements

 

v2.04

 

        Minor Bug Fix - Fixed support for midside nodes in 1D-2D Join Elements

 

v2.03

 

        Update Existing Feature - Added support for very large raster DEM's

        Update Existing Feature - Improved speed of displaying raster DEM's

 

v2.02

 

        New Feature - Added ability to vary translucence level of thematic mapping

        New Feature - Added support for MrSid image files
New FEature - Added support for interrogating GIS files
New Feature - added support for display of node labels for selected nodes only
New Feature - Enhanced speed of DEM triangulation

 

v2.01

 

        New Feature - Added ability to display labels for selected nodes only
Update Existing Feature - fixed display min/max parameters in conversion of ASCII Grid DEM's

 

v2.0

 

        New Feature - Added ability to vary translucence level of thematic mapping
New feature - Added support for JPEG2000 images
New feature - Added a default filter for the "open" button
New feature - Added support for 1D cross section files
New feature - Added ability to select nodes/elements using SQL criteria
New feature - Added ability to edit/create colour palettes

        New Feature - 1D cross sections
New Feature - Plot a profile of selected nodes
New Feature - Added support for MapInfo TAB files
New Feature - Added ability to set/determine flow direction for continuity lines

        New Feature - Added support to apply a projection setting to all files being loaded

        New Feature - Added support for storing locked nodes in binary network files

        New Feature - Added support for XY Text files

        Update Existing Feature - Enhanced continuity lines page
Update Existing Feature - Enhanced speed of properties form
Update Existing Feature - Increased number of elements a node can be connected to
Update Existing Feature - Improved network compaction
Update Existing Feature - Added ability to split selected quadrialterals into triangles using the 'Split Quad Into 2 Triangles' tool

        Update Existing Feature - Enabled selection of multiple files for conversion to DEMs.
Update Existing feature - Increased speed of ECW display

        Update Existing Feature - Hold down shift while using arrow keys to scroll a full page width
Update Existing Feature - Project files store the current view zoom level

        Update Existing Feature - Added automatic creation of fringe elements when importing network portions

        Bug Fix - Fixed display of ECW images with non-square pixels
Minor Bug Fix - Fixed access violation when applying properties to all selected 1D nodes

        Minor Bug Fix - Fixed conversion of large 12D DEM's to wrb format
Minor Bug Fix - Fixed automatic reset of contour intervals
Minor Bug Fix - Fixed loading of GEO files from project files

        Minor Bug Fix - Fixed checking of 1D-2D join and 1D junction elements

        Minor Bug Fix - Fixed reading of ECW image registration information

 

 

v1.85
New Feature - Added support for 12D (X,y,z,s) DEM file conversion
Update Existing Feature - Added ability read embedded header information in ECW files
Update Existing Feature - Significantly improved speed of network checking
Minor Bug Fix - Fixed saving of relative file paths for images in project files
Minor Bug Fix - Fixed loading of networks with non existent order seed elements

 

v1.84
Update Existing Feature - Added support to apply 1D properties to all selected nodes.
Update Existing Feature - Increased speed of drawing maps.

        Update Existing Feature - Increased speed of inserting midside nodes.
Bug Fix - Fixed creation of 1D-2D join elements.
Bug Fix - Fixed support for 1D junctions of more than 3 elements.

        Bug Fix - Fixed support for type 999 elements.

v1.83
Update Existing Feature - Added support for exporting view in BMP and JPG format.
Bug Fix - Fixed problem in saving an ordered network that had been compacted.
Minor Bug Fix - Fixed writing of 'Part-3' and 'Part-4' in short coordinate binary files.
Minor Bug Fix - Set maximum translucency level to 90% to prevent "clear" DEM's being drawn.
Minor Bug Fix - Added checking to 1D2D Join Elements to ensure correct creation.

v1.82
New Feature - added ability to change order of display of MAP layers
Update Existing Feature - added ability to display TIN DEM lines only
Update Existing Feature - interpolating from MAP files now remembers which maps selected to interpolate from
Update Existing feature - updated support for dual TIN DEM format
Update Existing Feature - increased speed of saving network files
Minor Bug Fix - fixed display of elevation range in network information box
Minor Bug Fix - fixed reinstatement of databox after a zoom/pan operation

v1.81
Minor Bug Fix - Fixed column offset problem with raster DEM's

v1.80-
Bug Fix - Fixed saving of element order in binary files

v1.71-
Update Existing Feature - Added support to store visibility of map files in project files
Update Existing Feature - Enhanced memory management when using TIN DEM's
Minor Bug Fix - Fixed reading of *.mpb map files saved in project files
Minor Bug Fix - Fixed slow editing of levee node propoerties
Minor Bug Fix - Fixed bug in exporting network as MIF/MID

v1.70-
New Feature - added popup menu to map layers on the view attributes form
Minor Bug Fix - fixed setting of contour intervals

v1.60-

New Feature - added support to interpolate elevation at a point when roving cursor using network elevation values
New Feature - hold down CTRL key when scrolling on network with elevation filled to see DEM value at that point
Minor Bug Fix - fixed integer overflow when handling very large image files
Minor Bug Fix - fixed handling of read only input files
Minor Bug Fix - fixed projection handling of xyz files

v1.55

        Minor Bug Fix - Fixed bug when trying to load ecw files without appropriate DLL's installed

v1.54

        New Feature - added support for SMS (GFGEN) Binary BIN files

        Update Existing Feature - Enhanced panning to incorporate dynamic image panning

v2.26

        - Bug Fix - fixed bug in rmalayer.maxmin when > 29997 elements
- Minor Bug Fix - fixed bug to re-enable nodal velocities

v2.25

        - New Feature - temp text added to velocity vectors
- New Feature - RMA11 arbitrary constituents can be re-labelled (saved in cfg file)
- New Feature - lock zoom added - <Ctrl Alt Z> to lock zoom between views
- Update Existing Feature - save links table to csv - overwrite prompt added
- Update Existing Feature - right click return to prevmode or popup menu rationalised

        - Update Existing Feature - zoom/pan and timesteps maintain current TOC panel
- Minor Bug Fix - resetting of timeseries button fixed

        - Minor Bug Fix - display of multiple result files in project

v2.23

        - New Feature - added slide bar to vary animation speed

        - Update Existing Feature - added flow and mass flux to profile plots

        - Update Existing Feature - added total mass in system to time plot

        - MInor Bug Fix - minor bug fixes

v2.15

        - New Feature - added support for translucent thematic filling

        - Update Existing Feature - Enhanced suppport for cross sectional profiles

v2.12

        - Minor Bug Fix - fixed reading of ASCII network file attributes

v2.10

        - Updated Existing Feature - configured to read all versions of RMA results files



waterRIDE™ and visionMAKER™ are Trademark and Copyright Patterson Britton & Partners. All other trademarks and copyrights are property of their respective owners.