v8.01

New features:
– [WR1D – AUTO STRETCH TO POLYGON] Added ability to stretch all cross sections to a bounding polygon (good for couled models)
– [WR1D – AUTO ALIGN CROSS SECTIONS] Added tool to automatically align cross sections to general river direction (avoiding localised anomalies)

Updated features:
– [MIKE11] Added the option of selecting the hazard definition to use when processing RES11 files.

Bug fixes:
– [WR1D] Fixed consistency issues with drawing, selecting and dragging cross-sections
related to the change introduced in v8.00 of using Cartesian angles instead of bearings.
– [WR1D] Fixed a bug where a highlighted branch would only highlight the first segment instead
of the entire branch.

v8.00

New features:
– [V8 LIBRARIES] Consistent with v8 waterRIDE libraries, interface and general tools
– [RUBICON] Can now import RUBICON GIS cross-section and spreadsheet data.
– [Projections] Now support custom projections.

Updated features:
– [MIKE11] The RES11 batch processing now uses the directory of the RES11 files as the
default output directory.
– [MIKE11] Will now create a default cross-section for cross-sections that do not have
any cross-section points in the RES11 file.
– [MIKE11] Will now ignore any invalid lines between the group name and the chainage value
of a cross-section.
– [MIKE11] Now support the slightly different new ASCII file format output by the latest
version of the RES11READ utility.
– [WR1D] Now store angles in Cartesian angles instead of bearings.
– [WR1D] After converting the projection of a WR1D layer, it will now automatically set the
layer projection to the new projection.
– [GIS layers] Introduced a spatial indexing for vector GIS layers.
– [Structured GIS] The prepare indices tool now gives an error message and identify the
coordinates of the cross-section if multiple centre-lines intersects that cross-section.
– [Structured GIS] The create TIN tool now identifies the two cross-sections that are
causing errors by their coordinates.
– [MIKE11] Importing RES11 file now produces a maximum water level (.wr1d_wl) file.
– [MIKE11] Improved the display text for active cross-sections including showing the
maximum water level if it is available.

Bug fixes:
– [MIKE11] Fixed a bug where if there were cross-sections with no points, those cross-sections
would overwrite the water level and velocity values of the first point of the first
cross-section.
– [MIKE11] Fixed a bug in the RES11 to WR1D conversion that caused the orientation of some
cross-sections to be flipped 180 degrees
– [Structured GIS] Fixed a range check error when preparing the cross-section indices if
there was no chainage field.
– Fixed a bug that prevents the window showing the active record from showing.
– [WR1D] Fixed a bug that prevented the re-projection of WR1D layers in the view and for
permanent conversions.
– [LINK-NODE] Fixed a bug that gave a “List index out of bounds” error when converting
link/node model to WR1N.
– [LINK-NODE] Fixed a bug that prevents triangle from being deleted.
– [LINK-NODE] Fixed a bug where sometimes the WR1N network was not drawn on the map
until the user panned the screen.

v3.40

New features:
– [Projections] Added lat/long (NAD83), NAD83 UTM zoneS 1 to 23 and Web Mercator.

Updated features:
– [Structured GIS] The prepare indices tool now gives an error message and identifies the
coordinates of the cross-section if multiple centre-lines intersects that cross-section.
– [Structured GIS] The create TIN tool now identifies cross-sections that are
causing errors by their coordinates.
– [MIKE11] Importing RES11 file now produces a maximum water level (.wr1d_wl) file.

– [MIKE11] Improved the display text for active cross-sections including showing the
maximum water level if it is available.

Bug fixes:
– [LINK-NODE] Fixed a bug that gave a “List index out of bounds” error when converting
link/node model to WR1N.
– [LINK-NODE] Fixed a bug that prevents triangle from being deleted.
– [LINK-NODE] Fixed a bug where sometimes the WR1N network were not drawn on the map
until the user panned the screen.

v3.30

Update features:
– [WR1D] Extra cross-sections are now added individually instead of as multiples. Old
WRCAN file will be updated to reflect the changes. The new WRCAN will not be backwardly
compatible for the extra cross-sections.
– [WR1D] Can add cross-sections using the GIS lines in the view to calculate chainage.
– [WR1D] Added a tool for snapping points to the closest GIS line in the view.

Bug fixes:
– [WR1D] Fixed a bug in auto-rotate cross-sections tool that will sometimes flip the
cross-sections the wrong way by 180 degrees.

v3.27

Updated features:
– [WR1D] Added a tool under “File” -> “Import 1D File” to re-specify the location of
the RES11READ.exe file.

Bug fixes:
– Fixed some background colour problems of the toolbar.
– [WR1D] Put in an attempt fix of the issue where extra cross-sections were added
adjacent double Type-0 or double Type-1 points where the velocity would be zero for the
extra cross-sections.
– [WR1D] Fixed a bug that may cause the incorrect velocities to be used for extra
cross-sections.
– [LINK-NODE] Fixed a bug that caused LINK-NODE model to disappear from the screen.

v3.26

Updated features:
– [WR1D] Can no longer use the delete object tool to delete extra cross-sections.
– [WR1D] Deleting a cross-section will now also delete all the associated extra triangles.

Bug fixes:
– [WR1D] Fixed a bug where the extra cross-sections were not copied when copying the
WRCAN file from one network to another.
– [WR1D] Fixed a bug where the branch indices were used instead of the branch name
for matching cross-sections.
– [WR1D] Fixed a bug that sometimes allowed the add extra cross-sections tool to
insert cross-sections using other extra cross-sections. Will also ignore any
incorrect extra cross-sections in the WRCAN file created from using older buggy versions.
– [WR1D] Deleting the extra cross-sections will no longer leave behind the points of
the extra cross-sections.
– [WR1D] Fixed a bug that caused the nodes of extra triangles to change randomly after
deleting extra cross-sections.
– [WR1D] Fixed a problem where sometimes the appropriate tools on the toolbar were
not shown (e.g. when turning the TIN on).

v3.21

– [WR1D] Added a tool for auto-rotating the cross-sections.
– [WR1D] Removed the ability to view the *.WRCAN file under the View menu. Avoid the
problems caused by the 1024 characters line limit in the edit textbox.
– [Structured GIS] The chainage value will now be written if the “CHAINAGE” field is in
the file.

Bug fixes:
– [WR1D] Fixed several range check errors when importing a RES11 file with no network
data.
– [WR1D] Fixed the problem where the centre-line points were not adjusted accordingly
after the network coordinates were adjusted.
– [WR1D] Now the angles of the cross-sections are adjusted to preserve the orientations
with the branches when the network is rotated.
– [Projections] Fixed NZMG1949 projection that was using the wrong calculations.

– General library updates.

– Now the map will only repaint at the end of resizing.
Bug fixes:
– [MIKE11] Fixed a range check error when creating WRB from RES11 files if extra
cross-sections were added using other extra cross-sections (which normally shouldn’t
happen).
– [Legend] The edit legend dialog is now shown on the same screen as the main form
on multi-screen setup.
– [Structured GIS] Prepare indices from structured GIS and create TIN from indexed
contours now ignore deleted objects correctly.
– [HECRAS] Fixed a bug that caused the profile model lines to disappear on the
screen.

v3.20

– [License server] The license will no longer time-out due to heavy processing.
– [ECW] Added support for version 4.1 of ERDAS ECW JPEG 2000 SDK.
– [WR1D] The remove extra cross-section button now disables itself correctly when
the cross-sections are not active.
– [WR1D] Added the ability to rotate *.wr1d files.
– [WR1D] Added a tool for drawing centre-lines and aligning branches to them.

v3.11

Bug Fixes:

  • Fixed a bug where the Exit item under the File menu did not do anything.
  • [WR1D]  Fixed a bug where the original cross-sections are not connected correctly if extra cross-sections were inserted and then the network was reset.
  • [WR1D]  Fixed a bug in the conversion of WR1D file where the left-bank point index was lost if it was part of a starting descending run that was discarded.
  • [Structured GIS]  Now use CHAR(1) as the default field type.

 

v3.10

Bug Fixes:

  • [SOBEK]  Fixed some bugs in creating WR1D file from SOBEK 1D and creating the surface related to unicode in Delphi 2009.
  • [MIKE11]  Fixed a problem with the high X values of cross-sectiona points was causing precision error that resulted in incorrect matching of duplicated run of X-Z points.
  • [MIKE11]  Fixed a problem with incorrectly counting the length of duplicated run of X-Z points in cross-sections.
  • [MIKE11]  Fixed a problem that may occur with closed cross-sections.  It now ignores cross-sections with closed channels.
  • [MIKE11]  Now when running res11read.exe, it automatically writes the text file to the temporary folder first before copying the file to the proper location to avoid slow speed when the file is on the network.
  • [MIKE11]  Can now process very large RES11 text files without running out of memory.
  • [WR1D]  When selecting cross-section points, it will now only allow the relevant point to be selected, e.g. left and right points when stretching a cross-section and the centre point when deleting cross-sections.
  • [WR1D]  Added tools for adding/deleting extra cross-sections between two original cross-sections.
  • [XP-Storm]  Added a tool for converting XP-Storm output spreadsheet to structured GIS format.
  • [Structured GIS]  Added a tool for preparing the indices of structured GIS file
    using the centreline.
  • [Indexed Contours]  The create TIN surface from indexed contours tool has been moved to the new menu “GIS X-Sects”.
  • [MIKE11]  Now supports variable Manning’s n for the cross-sections.
  • [MIKE11]  After calculating the velocity along each point of a cross-section, it now normalises the values so that the calculated total flow matches the original flow value.
  • [MIKE11]  Now no longer tries to create the *.wr1d file if the conversion from binary RES11 file to ASCII format fails.
  • [MIKE11]  Fixed a bug that caused the time-varying data not read in correctly if the lines with unit names in the RES11 ASCII file are blank.

 

v3.05a

New Features:

  • Added a tool for creating TIN from indexed contour lines.
  • Added VICGRID94 to the supported projections.

 

v3.01

Bug Fixes:

  • [HECRAS-SDF]  Fixed bug with “*” in river stations of interpolated x-sects in the results file.

 

v3.00

New Features:

  • Added support for network license server.
  • [wRLibNew] added to project

 

v2.74

New Features:

  • [DRAINS]  The data/results import tool is now more robust and can no longer assume column numbers.
  • [DRAINS]  Now support basins in the network as well.

 

v2.73

Bug Fixes:

  • [MIKE11]  Fixed a bug that caused the program to go into an infinite loop when creating a WR1D file from MIKE11 with no X-Y coordinate values, i.e. all (0,0).
  • General library updates.

 

v2.72

Bug Fixes:

  • General library updates.
  • New vmscr file.
  • Single executable file for both standalone and network dongles (/network).
  • [HECRAS]  Made the reading of the cross-section CSV file more robust
  • [HECRAS]  Can now handle simplified results file with only Reach, River Sta,
    Profile, W.S. Elev and Vel Chnl columns.
  • [Data Layers Dialog]  Fixed a bug that resulted in no layers being removed
    from the current view if all layers were unchecked.
  • [wR Profile]  Added the option to specify the channel velocity factors in
    the cross-section (‘ChannPointVels’).
  • [HECRAS]  When importing HECRAS model using the profile points method, the river name is no longer case sensitive and the name may contain spaces.
  • Started using the Ini file in the user’s application data file.
  • [MIKE11]  The program now asks the user to select Res11Read.exe the first time, instead of hard-coding the location.
  • [MIKE11]  Now supports the MIKE11 2008 version ASCII file format with the possible georeferenced data of cross-sections.
  • [MIKE11]  Now cleans up any duplicated points or run of duplicate points inv2.60  (
  • [Imglayer]  Changed to give the warning message about ECW or MrSID DLL’s not found only once.
  • [Imglayer]  ECW and MrSID DLL files can now be located in a common folder
    instead of the local directory of the application.
  • Fixed a bug in the Quick Start dialog where the project would not be
    initialised correctly if the Open Existing project option was selected and
    then the user selected Cancel in the open file dialog.  This resulted in a
    range check error when adding a layer afterwards.
  • [WR1D]  The status bar now shows the map information when the move, delete or restore tool is selected.
  • [WR1D]  No longer assumes that the branch points section of the ASC file is
    sorted when converting ASC to WR1D.
  • [WR1D]  Fixed the problem where there was no TIN between two cross-sections if there was no type 2 point between them.
  • Fixed a potential problem of reading CSV text with an empty string surrounded by quote characters (i.e. “”). the cross-sections.
  • [MIKE11]  Now attempts to fix any points not in descending order and discards them if not possible.  Final cross-section points would be in ascending order.
  • [MIKE11]  Now the user no longer deals with the MIKE11 ASCII files explicitly.
  • *.wr1d is created directly from *.res11 and the *.res11 files are processed
    directly into WRB files.  The MIKE11 ASCII files (*.res11_txt) are created
    automatically as needed.
  • [SOBEK]  Sobek version information is now saved in the user’s application data INI file.
  • [MIKE11]  Fixed a bug in the creation of WRB that causes the water level of the left point of the first cross-section to be overwritten by water levels of
    cross-sections of deleted branches.
  • [HECRAS]  Fixed a bug where if there is a ‘*’ in the station value of a cross-section of a SDF file, the cross-section would not be read correctly.
  • [WR1D]  Need to hold down the Alt key to cycle through points that are close to each other.

 

v2.60

Bug Fixes:

  • [Imglayer]  Changed to give the warning message about ECW or MrSID DLL’s not found only once.
  • [Imglayer]  ECW and MrSID DLL files can now be located in a common folder
    instead of the local directory of the application.
  • Fixed a bug in the Quick Start dialog where the project would not be
    initialised correctly if the Open Existing project option was selected and
    then the user selected Cancel in the open file dialog.  This resulted in a
    range check error when adding a layer afterwards.
  • [WR1D]  The status bar now shows the map information when the move, delete or restore tool is selected.
  • [WR1D]  No longer assumes that the branch points section of the ASC file is
    sorted when converting ASC to WR1D.
  • [WR1D]  Fixed the problem where there was no TIN between two cross-sections if there was no type 2 point between them.
  • Fixed a potential problem of reading CSV text with an empty string surrounded by quote characters (i.e. “”).

 

v2.52

Bug Fixes:

  • WaterRIDE library update.
  • [WR1D]  Fixed a bug an access violation error that occurred during the adding
    of extra TIN triangles if the network contains extra TIN triangles belonging
    to deleted cross-sections.
  • [HECRAS]  When importing HECRAS model using the profile points method, it now no longer expects the river name if there is only a single river.

 

v2.51

Bug Fixes:

  • [HECRAS]  Now supports the importing of HEC-RAS ASCII GIS export (*.sdf)
  • Fixed a bug where the zoom window was stuck on the top-left corner if a wR1D layer was active.
  • [WR1D]  The add triangle tool now uses the highlighted node rather than try
    to find a new node using the coordinates.
  • [WR1D]  The delete triangle tool now deletes the highlighted triangle instead
    of trying to find a triangle at the mouse cursor.
  • Toolbars that are currently not available are made not visible instead of
  • Fixed the problem where if multiple points are on top of each other, only
    one could be selected.
  • [WR1D]  Added tool buttons for deleting and restoring objects.
  • [WR1D]  Removed the enter and delete keys for deleting and restoring objects
  • [WR1D]  When exporting network to GIS, if the projection of layer is not set,
    a dialog box will prompt the user to select the projection to use.  This avoid
    the non-earth projection problem when the GIS files are imported in MapInfo.
  • [WR1D]  Now write out the real extent for the exported GIS network.
  • [WR1D]  Sped up the reading of the MIKE11 time-step by not processing
    unnecessary data.
  • [WR1D]  Now only draws the outline of the cross-section TIN instead of all
    the triangles to save the re-TINning and redrawing time.  It was a problem
    for large networks which were taking several seconds each time to re-TIN
    and to redraw.
  • [HECRAS]  Fixed the problem where the ‘*’ in the river station values of some
    result files was crashing the conversion process.

 

v2.50

Bug Fixes:

  • [WR1D]  Processing MIKE11 result files now supports choosing time-step
    size to save the results.
  • [DTM]  Added support for DTM files that contain terrain only.
  • Can no longer add the same file twice in the data layers dialog.
  • Reorganised and rationalised the menu items for converting 1D models [dmc].
  • Now need to select a tool before dragging and moving points in a wR1D network.

 

v2.21

  • New cursor for the info mode.
  • [wR1D]  When converting MIKE11 binary file to ASCII, or MIKE11 ASCII to wr1d files.  The original file name is given as the default output file name
  • [wR1D]  Added batch MIKE11 binary to ASCII file conversion.
  • [wR1D]  Fixed bug for factor coords where the new coordinates were not
    written to the wr1d file.
  • [wR1D]  Fixed the bug where when the extent of a cross-section is resetted in
    memory, the first and the last cross-section points were used instead of the
    left and right extent points.
  • [wR1D]  Fixed bug when processing MIKE11 files, the output WRB files were
    written in the same directory as the input ASCII file instead of the specified
    output directory.
  • [wR1D]  When processing a single MIKE11 results file, the file name of the
    input MIKE11 ASCII file is suggested as the file name of the output WRB file.
  • [wR1D]  Now the wR1D layer takes into account the left and right cross-section points as well as the branch points when determining the layer extent.
  • Added the mouse wheel adjusting zoom factor feature.  Zoom factor is displayed on the status bar.
  • [wR1D]  Fixed the problem with the extra TIN triangles not removed correctly
    when the branch of a TIN triangle point is inactive.
  • Coordinates are now displayed even where the project is not saved.
  • Coordinates are displayed for mouse position when zooming and panning tools are active.
  • [HECRAS]  The processed HECRAS surface now contains only water level and
    velocity data.  No more dummy ground level and DELVAL VxD and hazard values.
  • [GIS]  More efficient GIS shape search.
  • [RST]  Enabled support of RST layers in wR-1D.
  • [Generic 1D]  Added support for time-varying generic 1D models [camd].
  • [Generic 1D]  Added a tool for converting coordinate projections [camd].
  • [Generic 1D]  Added a tool for copying the TIN extents of generic 1D models
    (for time-varying files) [camd].
  • [DRAINS]  Fixed a bug where commas in the text of the DRAINS export files
    were causing parsing errors.

 

v2.20

New Features:

  • Added support for batch processing of MIKE11 and SOBEK results files.
  • (wR-1D) – Added support for processing files produced by earlier versions of SOBEK.

Updated Features:

  • (wR-1D) – Changed the order of some dialogs to a more logical order.
  • A few general improvements to the user interface.
  • Some miscellaneous improvements to the display.

Bug Fixes:

  • (wR-1D) – Fixed several problems associated with using projections for a wR-1D layer.
  • (wR-1D) – Fixed a problem where MIKE11 ASCII result files may not be read correctly if a branch name exceeds 15 characters.
  • (wR-1D) – Fixed several problems with the processing of SOBEK 2D result files.
  • (wR-1D) – Fixed a problem where some cross-section points may not be selectable with the mouse if they are too close to each other.
  • (wR-1D) – Fixed a memory efficiency problem that causes the application to slow down gradually when editing a network.
  • Fixed a problem in the calculation of custom hazard categories.
  • (HEC-RAS) – Fixed the direction of HEC-RAS model velocity vectors.
  • Minor Bug Fix (wR-1D) – Fixed various flow-logic problems in a few dialogs.

 

v2.11

New Features:

  • (wR-1D) – Added support for the addition and removal of extra TIN triangles.
  • (wR-1D) – Added support for converting waterRIDE MIKE11 *.can files to waterRIDE 1D Surface *.wrcanfiles.
  • (wR-1D) – Added the MIKE11 binary to ASCII file conversion tool to the menu.
  • (wR-1D) – Ctrl-A now selects all lines in the *.wrcan editor.

Bug Fixes:

  • (wR-1D) – Fixed a bug where the angle of a cross-section may be calculated incorrectly for a network.
  • Minor Bug Fix (wR-1D) – Fixed several minor display errors.

 

v2.10

New Features:

  • (wR-1D) – Added support for MIKE11 models, superceding waterRIDE MIKE11.
  • (wR-1D) – Pressing ‘R’ when a wR-1D layer is active is a shortcut for setting the layer to use the random palette.

Updated Features:

  • Feature (wR-1D) – Changed the file format of the *.wr1d file. Existing *.wr1d files will have to be recreated. This has no effect on existing *.wrcan files.

 

v2.01

New Features:

  • Added the export view function.
  • (wR-1D) – Added the export wR-1D network to GIS function.
  • (wR-1D) – Added the support for the best-effort recreation of an existing *.wrcan file of a different wR-1D network.
  • (wR-1D) – Holding down the Ctrl key now locks the length of a cross-section when it is being dragged.

 

Updated Features:

  • Update Existing Feature (wR-1D)- Deleted cross-sections of a branch will now be TIN’ed across between the upstream and downstream cross-sections.
  • Update Existing Feature – Added some hint text to the menu items.

 

v2.00

New Features:

  • New Feature – Added support for generic link-node models.
  • New Feature – Added support for SOBEK 1D and 2D models.

Bug Fixes:

  • Bug Fix – Fixed the image registration feature.